HP ML330 manual HP Cooling Options

QuickSpecs

HP ProLiant ML330 Generation 6

Core Options

HP Power Supplies	NOTE: It is highly recommended that you use the HP Power Advisor in defining
	the "Right-Size" power supply for your need. The HP Power Advisor is located
	at: www.hp.com/go/proliant-energy-efficientor www.hp.com/go/hppoweradvisor
	CAUTION: Optional Power Supplies used for Redundancy "must" match the
	original supplied power supply. Upgrades for more power headroom, when
	replacing the original power supplies must match if purchased for redundancy.
	Option Kits contain optional power supply, an IEC power cable and PDU IEC
	cables. In ProLiant Servers that have more than one power slot (bay), only same
	size power supplies are recommended. If non-matched power supplies are
	inserted you will get errors and operation will fail.
	HP 750W CS HE Power Supply	512327-B21
	NOTE: The HP 750W power supply requires purchasing the Redundant Power
	Supply Enablement Kit (P/N 508544-B21).
	HP Redundant Power Supply Enablement Kit	508544-B21
	NOTE: The Redundant Power Supply Enablement kit does not integrate any
	power supply. To enable full Redundancy, it requires 2 units of 750W Power
	supply.
HP Cooling Options	HP 5U G6 Redundant fan kit	513927-B21
	NOTE: Option Kits contain optional power supply, an IEC power cable and PDU
	IEC cables.

DA - 13361 Worldwide QuickSpecs — Version 17 — 3-31-2010 Page 22