Using the Projector

Using Auto Power-On

The projector can be set to turn on automatically whenever a valid signal is detected from an input source. This feature is disabled for shipping. To enable it, use the Input Source Select menu item in the On-Screen Display menu. Refer to Chapter 3, “Using the On-Screen Display Menu,” for more information.

Powering Off the Projector

1.Press the Power/Standby button 1 to turn off the projector lamp.

The message “Going to Standby” displays and the LED on the Power/Standby button blinks amber.

ÄCAUTION: Wait until you see a steady amber LED (approximately

45 seconds) before turning the projector back on. Failure to follow this caution can result in damage to the projector.

2.Once the Power/Standby LED has turned steady amber, disconnect the power cord from the electrical outlet and the projector 2.

Compaq iPAQ Microportable Projector MP1200 User’s Guide

2–7