Care and Maintenance
■Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.
■Do not drop the projector or place it on an unstable surface.
■Do not expose the projector to rain or moisture.
■Do not allow anything to rest on the power cord. Do not walk on the cord.
■Do not allow the projector to be exposed to high temperatures.
■Do not open the projector or attempt to service this product for any reason other than to replace the lamp module. Adjust only those controls that are covered by the operating instructions. If the projector is not operating properly or has been dropped or damaged, contact your Compaq authorized dealer, reseller, or service provider.
Cleaning the Lens
To minimize the risk of damaging or scratching the lens surface, follow this cleaning procedure. First, remove any dust particles from the lens by blowing them off with clean, dry, deionized air. However, this may not be a convenient method, and an alternate method is described below.
ÄCAUTION:surface. Do not spray any type of fluid or cleaner directly on the lens
1.Spray a clean cloth with a cleaner recommended for cleaning camera lenses.
2.Wipe the lens in a single direction with the cloth. Do not wipe back and forth across the lens surface.
Compaq iPAQ Microportable Projector MP1200 User’s Guide |