Troubleshooting

Troubleshooting (Continued)

Problem

Solutions

Image size is too small or too large. 1. Adjust the digital zoom or move the camera until the image is the desired size.

2. The projector may be set to display

in the center of the display area without any expansion. To change the setting, access the on-screen display menu, select A/V & HDTV Control, select HDTV/Video, then select how the image should be shown in the display area. Refer to Chapter 3, “Using the On-Screen Display Menu,” for more information.

The image is upside down or a The projector has been set for operation

mirror image is displayed.in rear screen mode or ceiling mount mode. To display the image properly, access the on-screen display menu, select Image Control, select Flip Image, then restore the displayed image to the correct setting. Refer to Chapter 3, “Using the On-Screen Display Menu,” for more information.

The desired source is not displayed.

Press the Source button on top of the projector to review and select from the active video sources.

8–8

Compaq iPAQ Microportable Projector MP1200 User’s Guide