Getting Started

Identifying the Projector Buttons (Continued)

Item

Symbol

Control

Function

 

 

 

 

3

 

Power/Standby

Powers the projector lamp on and off.

 

 

button

The Standby LED changes color

 

 

 

modes to indicate the following

 

 

 

operating modes:

 

 

 

1.

Flashing green indicates the

 

 

 

 

projector is going into standby

 

 

 

 

mode and cannot be restarted until

 

 

 

 

the LED glows amber steadily.

 

 

 

2.

The LED button rapidly flashing

 

 

 

 

green indicates the lamp has

 

 

 

 

automatically shut down due to an

 

 

 

 

over-temperature event.

 

 

 

3.

A steady amber LED indicates the

 

 

 

 

projector is ready to power-up.

 

 

 

4.

A steady green LED indicates the

 

 

 

 

projector is on and operating

 

 

 

 

properly.

 

 

 

 

4

 

Menu button

Press this button once to start the

 

 

 

on-screen display menu. Press it

 

 

 

again to save any changes and exit

 

 

 

the menu.

 

 

 

 

5

 

Enter/Accept

When the on-screen display menu is in

 

 

button

use, performs the following functions:

 

 

 

1.

Displays any sub-menus below the

 

 

 

 

main menu.

 

 

 

2.

If pressed after selecting “yes” or

 

 

 

 

“no” to a question, the request will

 

 

 

 

be processed and the menu will go

 

 

 

 

one level higher.

 

 

 

3.

If pressed after changing an

 

 

 

 

adjustment scale, the new

 

 

 

 

information will be saved and the

 

 

 

 

menu will go one level higher.

 

 

 

 

 

1–6

Compaq iPAQ Microportable Projector MP1200 User’s Guide