Troubleshooting
Troubleshooting (Continued)
Problem | Solutions | ||
|
|
| |
Only the Compaq startup screen | 1. | Check that the cables are connected | |
displays. |
| securely. | |
| 2. | Verify that the proper input source is | |
|
| connected. | |
| 3. | Make sure your notebook | |
|
| computer’s external video port is | |
|
| activated. | |
|
|
| |
A blue screen displays on the | 1. | Check the Play or TV/Video buttons | |
projection screen when a |
| on the video source. | |
videocassette recorder, DVD | 2. | If that does not work, refer to the | |
player, or other video source is | |||
| owner’s manual that came with the | ||
connected to the projector. |
| ||
| video source. | ||
|
| ||
|
|
| |
The projector makes a “ticking” | 1. | The projector lamp is too hot to light. | |
sound when it is turned on and the |
| Turn the projector off and wait for it | |
projector lamp does not go on. |
| to cool down before turning it on | |
|
| again. | |
| 2. | The projector lamp is not making a | |
|
| good connection. Check to be sure | |
|
| the lamp module is installed | |
|
| correctly. Refer to “Replacing the | |
|
| ||
|
| Chapter 7 for more information. | |
| 3. | The projector lamp has reached the | |
|
| end of its life. Replace the lamp as | |
|
| described in the “Replacing the | |
|
| Projector Lamp Module” section of | |
|
| Chapter 7. | |
|
|
| |
Compaq iPAQ Microportable Projector MP1200 User’s Guide |