Care and Maintenance

After the lamp module has been replaced, reset the lamp hours in the on-screen display menu to prevent the “Lamp May Fail Soon. Replacement Suggested” message from appearing again. To reset the lamp hours:

1.Be sure the projector is turned off.

2.Make sure all connections except the power cable are disconnected.

3.Press and hold the Menu button on top of the projector while turning the projector on.

4.Connect the VGA cable to the projector. The OSD menu will appear, and “Service” will now be displayed as an option in the Main menu.

5.Select Service and press the Enter/Accept button on the top of the projector.

6.Select Reset Lamp Hours from the Service menu and press the Enter/Accept button.

7.Select Yes from the Confirm Reset menu and press the

Enter/Accept button.

8.Select Save and Return.

7–6

Compaq iPAQ Microportable Projector MP1200 User’s Guide