Complete the following steps to upgrade the projector’s ROM:
1.Connect the DFP end of the cable to the DFP connector on the projector and the DVI end of the cable to the input end of the Flash ROM RS232 adapter.
2.Connect the other end of the Flash ROM RS232 adapter to the RS232 (serial) connector on the computer.
3.Power on the computer and monitor only (if applicable).
4.Access Compaq’s web site at:
http://www.Compaq.com/Services/Projectors/
MP1800/Softpaqs.
5.Follow the steps outlined on the Web site.
6.Power on the projector.
7.Wait about two minutes to allow the Flash Upgrade program to complete the upgrade, then the projector will automatically reset and be ready to use.