4.To make a selection from the level 2 menu, press the Minus (-) button to scroll down the level 2 menu, or press the Plus (+) button to reverse the scroll direction.

5.Highlight the selection and press the Select button to confirm the selection. The level 3 menu displays.

6.Level 3 for Position functions display the adjustment scales. Use the Minus button to decrease and the Plus button to increase the screen Horizontal and Vertical positions.

Some menu functions display adjustment scales in the level 2 menu, while others display adjustment scales in the level 3 menu.

7.After making the adjustment, select Save and Return. To void any changes made, select Cancel instead of Save and Return.

8.To exit from the on-screen menu, select Exit from the Main menu. If the display is a second or third-level menu, select Save and Return or Cancel, then select Exit from the Main menu.

Explaining Functions in the Analog On-Screen Menu

Brightness and Contrast—Adjusts the displayed image brightness and contrast ranges from 0 to 100.

An example of a standard setting is to set the contrast level to 67 and the brightness level to 50.

Position—Fine-tunes the horizontal and vertical positions of the display.

Zoom—Magnifies an image up to a factor of 32 on the projection screen (zooms in to a specific area on the screen, and pans left, right, up, and down).

Keystone—Adjusts image distortion at the top and bottom widths of the screen caused by tilting the projector.

Picture—Adjusts the gamma value or degree of contrast of darkness or light for the projected image.

2-6

Using the Projector