CAUTION: Failure to press the elevator button before adjusting the elevator foot can result in damage to the elevator mechanism.

✎To fine-tune the leveling of the projector, rotate the knobs ➌ on either side of the foot and adjust the leveling.

Adjusting the Projector Focus

To focus the projected image, rotate the focus ring ➊ until the image is clear. The projector will focus at distances from 4.92 (1.5 meters) to 16.4 feet (5 meters).

If vertical bars appear on the display after adjusting the focus, press the Resync button ➋ to automatically synchronize and track the display. If the button does not correct the display, use the Digital Conversion feature in the on-screen menu to manually adjust the synchronization and tracking. Refer to the “Adjusting the On- Screen Menus” section in Chapter 2.

1-14

Getting Started