HP MP1800 Introducing the Analog On-ScreenMenu, Analog On-ScreenMenu Adjustments

IMPORTANT: To use standby mode, press the Standby button and, after a six to ten-second delay, the unit enters standby mode and the projector lamp turns off. A “Going to Standby” message appears on the screen for the duration of the six to ten-second delay. When the message disappears from the screen, there is a 45-second delay before the lamp can be turned back on. Wait 45 seconds to allow the lamp to cool before pressing the Standby button again.

Introducing the Analog On-Screen Menu

The adjustments for screen settings are located in the on-screen menu and can be viewed in one of seven available languages.

Analog On-Screen Menu Adjustments

To display the analog on-screen menu, press the Select button. The following menu shows the functions at each level:

Main Menu	Menu Level 2	Menu Level 3
Brightness	Adjustment scale
Contrast	Adjustment scale
Position	Horizontal Position	Adjustment scale
	Vertical Position	Adjustment scale
	Save and Return
	Cancel
Zoom	Zoom	Adjustment scale
	Panning Left-Right	Adjustment scale
	Panning Up-Down	Adjustment scale
	Save and Return
	Cancel
Keystone	Adjustment scale
Picture	Dark - Light
Color	(Color temperature)
	Custom Color	Adjustment scale
	Saturation	Adjustment scale
	Save and Return
	Cancel
Digital	Clock	Adjustment scale
Conversion	Clock Phase	Adjustment scale
	Save and Return
	Cancel
		Continued

Using the Projector 2-3