When the Multimedia Adapter is attached to the projector, the following messages, in addition to the previous messages, will appear on the projection display to identity the following conditions:
■Analog, Use Source to Change Input—Indicates analog and DVI inputs are connected. Since the projector will default to display analog, you must press the Source button to switch to DVI.
DVI, Use Source to Change Input—Indicates DVI along with other video and/or analog sources present. Analog is the default setting. Press the Source button to switch to DVI.
Analog, Use PIP for Picture in Picture or Use Source to Change Input—Indicates analog plus video and DVI are present. Analog is the default setting. Press the PIP button on the remote control for picture in picture or change the setting by pressing the Source button.
Composite Video, Use Source to Change Input—Indicates composite video or other inputs are present. Composite video is the default setting. Press the Source button to the setting.
S-video, Use Source to Change Input—IndicatesS-video with other inputs are active. Press the Source button to change the setting.