Special On-Screen Messages
Special on-screen messages will appear on the projection display to identify the following conditions:
■Check Video Cable: Indicates the video cable may not be plugged into the projector or the selected video input is not accurate.
Input Signal Out of Range—Indicates the projector is unable to access the appropriate input signal.
2 Inputs Active - Remove One—The projector has two data inputs: one is an analog D-Sub input and the other is a digital DFP input. This message indicates that both inputs are active simultaneously and the user should detach one of them.
NOTE: This message appears only when the Multimedia Adapter is not attached to the projector.
Going to Standby—Indicates the projector is entering a sleep mode or is powering off the lamp.
Lamp May Fail Soon, Replacement Suggested—Indicates the lamp is approaching failure. The message will remain on the screen for five seconds or until the on-screen menu Select button is pressed.
