Upgrading the Projector, To update the firmware | HP mp3222 specification

Maintaining the Projector

Upgrading the Projector

To update the firmware

HP might periodically release updated versions of the projector firmware to enhance the projector performance. The projector firmware version is shown in the on-screen menu at Help. Check for updated versions at http://www.hp.com/go/proj_firmware.

USB method

1.On a computer with a USB port, go to the HP projector upgrade website (see introduction for this section) and download the latest file intended for a USB upgrade.

2.Connect the USB cable between the USB port on the projector and the USB port on the computer.

3.On the computer, run the file you downloaded by double-clicking the file. Follow the on-screen instructions.

User’s Guide

47

Image 47

HP mp3222 manual Upgrading the Projector, To update the firmware

Contents

Mp3220 series digital projector User’s guide First Edition May Contents Adjusting the Projector Index Contents Setting Up What’s in the Box? Identifying the contents of the box Symbol Function Identifying Common Features Projector at a glance Identifying the projector Symbol Function Projector buttons and lights Back panel Identifying the back panel Symbol Function Remote control Accessories Setting Up the Projector To position the projector Calculating projection dimensions To set up on a table To connect power To connect a computer To connect a handheld organizer To connect video sources Setting Up Setting Up To turn the projector on Turning On and Off To turn the projector off To aim the projector Making Basic Adjustments To adjust the focus and zoom Setting Up Giving Presentations Using the Remote Control Giving Presentations To present from a computer Showing Presentations To hide or show the display To change the source To adjust a slanted picture Adjusting the ProjectorAdjusting the Picture and Sound To adjust the audio To adjust the image according to the type of pictureTo adjust other image settings To adjust the projector setup Using the On-Screen Menu Or down to quickly move to another setting and adjust it To change settings using the on-screen menu Quick choice Quick choice menu For a visual aid, see Back panel on Select input menu Adjust picture Adjust picture menu Adjusting the Projector Help menu Setup menu To get the projector status Performing Routine MaintenanceMaintaining the Projector To replace the lamp module To clean the projector lens Maintaining the Projector To replace the battery in the remote control Upgrading the Projector To update the firmware Maintaining the Projector To install on a table Installing PermanentlyInstalling the Projector To install on the ceiling Installing Permanently To install for rear projection Insert the lock 1 into the hole and twist the key To mount the projector on a tripodTo lock the projector Installing Permanently Troubleshooting Suggestions Fixing Problems If no lights or sounds turn on Start-up problems Picture problems Fixing Problems Fixing Problems Fixing Problems Interruption problems Sound problems Remote control problems To run the projector diagnostics Testing the Projector Fixing Problems Reference SpecificationsIdentifying the projector specifications Reference Storage Sync Hz Sync kHz Analog Video Mode Compatibility MAC II Safety precautions Safety Information Mercury safety LED safety Canada Regulatory Information Japan Korea Declaration of Conformity International Installation ConfigurationHide button using Image adjusting See ceiling installation Slanted picture See keystone correction sound Locking 53 setup AdjustingConnecting video source Zoom adjusting 27 range Index