LED safety, Mercury safety | HP mp3222 instruction

Reference

LED safety

The infrared ports located on the digital projector and remote control are classified as Class 1 LED devices according to International Standard IEC 825-1 (EN60825-1). This device is not considered harmful, but the following precautions are recommended:

■If the unit requires service, contact an authorized HP service center.

■Do not attempt to make any adjustment to the unit.

■Avoid direct eye exposure to the infrared LED beam. Be aware that the beam is invisible light and cannot be seen.

■Do not attempt to view the infrared LED beam with any type of optical device.

Mercury safety

ÅWARNING: This digital projector lamp contains a small amount of mercury. If the lamp breaks, adequately ventilate the area where the breakage occurred. Disposal of the lamp might be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance at http://www.eiae.org.

User’s Guide

71

Image 71

HP mp3222 manual LED safety, Mercury safety

Contents

Mp3220 series digital projector User’s guide First Edition May Contents Adjusting the Projector Index Contents Setting Up What’s in the Box? Identifying the contents of the box Symbol Function Identifying Common Features Projector at a glance Identifying the projector Symbol Function Projector buttons and lights Back panel Identifying the back panel Symbol Function Remote control Accessories Setting Up the Projector To position the projector Calculating projection dimensions To set up on a table To connect power To connect a computer To connect a handheld organizer To connect video sources Setting Up Setting Up To turn the projector on Turning On and Off To turn the projector off To aim the projector Making Basic Adjustments To adjust the focus and zoom Setting Up Giving Presentations Using the Remote Control Giving Presentations To present from a computer Showing Presentations To hide or show the display To change the source To adjust a slanted picture Adjusting the ProjectorAdjusting the Picture and Sound To adjust the audio To adjust the image according to the type of pictureTo adjust other image settings To adjust the projector setup Using the On-Screen Menu Or down to quickly move to another setting and adjust it To change settings using the on-screen menu Quick choice Quick choice menu For a visual aid, see Back panel on Select input menu Adjust picture Adjust picture menu Adjusting the Projector Help menu Setup menu To get the projector status Performing Routine MaintenanceMaintaining the Projector To replace the lamp module To clean the projector lens Maintaining the Projector To replace the battery in the remote control Upgrading the Projector To update the firmware Maintaining the Projector To install on a table Installing PermanentlyInstalling the Projector To install on the ceiling Installing Permanently To install for rear projection Insert the lock 1 into the hole and twist the key To mount the projector on a tripodTo lock the projector Installing Permanently Troubleshooting Suggestions Fixing Problems If no lights or sounds turn on Start-up problems Picture problems Fixing Problems Fixing Problems Fixing Problems Interruption problems Sound problems Remote control problems To run the projector diagnostics Testing the Projector Fixing Problems Reference SpecificationsIdentifying the projector specifications Reference Storage Sync Hz Sync kHz Analog Video Mode Compatibility MAC II Safety precautions Safety Information Mercury safety LED safety Canada Regulatory Information Japan Korea Declaration of Conformity International Installation ConfigurationHide button using Image adjusting See ceiling installation Slanted picture See keystone correction sound Locking 53 setup AdjustingConnecting video source Zoom adjusting 27 range Index