HP mp3222 manual To install for rear projection

Installing Permanently

If you do not use an HP ceiling mount, mount the projector according to the following dimensions:

■X = 82 mm (3.23 in.)

■Y = 55 mm (2.17 in.)

■Z = 110 mm (4.33 in.)

■Thread size = M3

To install for rear projection

1.Place the projector 1.2 to 12 m (4 to 40 ft) behind a translucent screen that is designed for rear projection.

See “To set up on a table” on page 17 or “To install on the ceiling” on page 50 for more instructions.

2.Open the on-screen menu and select Setup > Projector position. Then select Rear Table or Rear Ceiling from the drop-down list.

52 User’s Guide