Installations

Installing HP Velocity on servers with Broadcom teaming inter-

Installing HP Velocity on servers with Broadcom teaming interfaces

Installing HP Velocity on Windows Servers using the Broadcom Advanced Control Suite NIC Teaming feature might require the following additional steps.

If HP Velocity is installed on Windows Servers, ensure that the LiveQoS NDIS 6 Filter Driver is disabled in the adapter settings (Figure 10).

To disable the LiveQoS NDIS 6 Filter Driver:

1.Install the HP Velocity server-side component as described in “Server-side installation” on page 18.

2.Once the installation is complete, a prompt asking to reboot the system will appear. Click NO.

3.Open the Network and Sharing Center from the Control Panel.

4.Click Change Adapter Settings.

5.Right-click Team 1 (Figure 9).

Figure 9. Adapter settings

6.In the list titled This connection uses the following items, deselect the checkbox next to LiveQoS NDIS 6 Filter Driver (Figure 10).

HP Velocity Server Side Deployment Guide

21