HP mt40 Mobile manual Working with network statistics

Using the Management Application			Network Statistics
	Statistic name	Description
	Non-accelerated Throughput	The bytes of all received non-protected IP packet data in Kbps for intervals
	(Rx)	or KB/MB for cumulative totals.

Working with network statistics

HP Velocity provides controls on the Network Statistics tab (Table 13) for working with the data available.

Table 13. Network statistics operations

Operation	Description
Logging Interval	Sets the frequency at which statistics will be logged to the log file. Logging
	is enabled when one of the following intervals is selected:
	• Every 5 Seconds
	•	Every Minute
	•	Every 5 Minutes
Save Log History	Export the statistics log to a comma-separated value (CSV) file.
	NOTE: The Save Log History control is available only when logging is
	enabled.
Save Log Snapshot	Saves the current 5-second, 1-minute, and 5-minute interval statistics to a
	file with the same column order as the statistics history file.
Clear Statistics	Resets statistic counts and collection time to zero.

NOTE: When enabled, logging is available only until the system is reset. After a reset, logging reverts to the setting specified in the Group Policy, if applied. Otherwise, it reverts to the default setting (disabled).

NOTE: Log files are stored in the temporary folder for the current user. For

example, C:\Users\<username>\AppData\Local\Temp. The log filename format is HPVelocity_logtype_yymmdd.log.

HP Velocity Server Side Deployment Guide 49