HP Thin Client mt40 Mobile Configuring the network simulator, NOTE:, Table 23. LiveTCP - Latency Mitigation parameters, Figure 32. Network simulator configuration dialog

Using the Management Application Configuration

NOTE: LiveTCP policy filters are also configurable by selecting LiveTCP under Policy Filters.

Table 23. LiveTCP - Latency Mitigation parameters

Configuration option	Description
Latency Threshold	Set the latency threshold in milliseconds. Latency mitigation is activated
	once this threshold is exceeded.
	The default setting is 20 ms.
Congestion Control	Apply the degree of congestion control required.
	•	Aggressive: Handles the effects of a high-latency network. Aggressive is
		the default setting.
	•	TCP Friendly: Uses the standard TCP-like congestion control algorithm.

Configuring the network simulator

The network simulator provides the ability to simulate network loss and test how HP Velocity- protected flows respond to varying rates of loss in the network. Table 24 describes the configurable network simulator parameters for packet loss.

Figure 32. Network simulator configuration dialog

HP Velocity Server Side Deployment Guide 70