Using the Management Application | Configuration |
Configuring global system settings
Configure global system settings (Table 18) to set the HP Velocity operational mode; enable or disable optimizers, packet loss protection, latency mitigation, and beaconing; and set the network maximum transmission unit (MTU).
Figure 25. System settings configuration dialog
Table 18. System Settings parameters
Configuration option | Description | |
|
|
|
Operation Mode | • | Protect: HP Velocity provides session establishment, session statistics, |
|
| packet loss protection, WiFi optimization, and latency mitigation. |
| • | Monitor: HP Velocity continuously profiles the |
|
| conditions over established flows, but the HP Velocity network optimizers |
|
| are disabled. |
| • | Off: HP Velocity passes all network flows transparently and does not |
|
| perform any monitoring or optimization. |
|
| |
LiveQ - Packet Loss | Enable or disable LiveQ - Packet Loss Protection. | |
Protection | Protects application flows from packet loss by automatically adapting the | |
| amount of added redundancy. | |
|
| |
LiveTCP- Latency Mitigation | Enable or disable LiveTCP - Latency Mitigation. | |
| Provides latency mitigation for RDP, RGS, and ICA protocols. | |
|
|
|
HP Velocity Server Side Deployment Guide | 57 |