Removal and Replacement Procedures

6.Use a flat-bladed tool to pry forward on the four clips on the LED cover 1 (Figure 5-14).

7.Press the esc and F1 keys to reveal the left notch 2 in the LED cover.

8.Insert a flat-bladed tool into the left notch and lift the left side of the LED cover 3.

9.Press the Pause and Del keys to reveal the right notch 4 in the LED cover.

10.Insert a flat-bladed tool into the right notch and lift the right side of the LED cover 5.

11.Remove the LED cover 6.

Figure 5-14. Removing the LED Cover

Reverse the above procedure to install the LED cover.

Maintenance and Service Guide

5–17