HP PE4240N Fine tuning a channel

6Highlight and select To Be CH A or To Be CH B so it turns red. Adjust the setting so it reads YES to select the channel (or NO), and then press Setting front panel button (Enter on the remote control).

7Exit the menu.

Fine tuning a channel

1Make sure TV is the input signal for the main picture. Refer to “Selecting the input source” on page 26.

2Display the OSD menus. Refer to “Using the On Screen Display (OSD) Controls” on page 28 for steps to open and use the menus using the front panel buttons (or the remote control buttons).

3Select and display TV Setup menu.

4Highlight and select User CH so it turns red. Adjust the setting so it reads the channel number you want to fine tune, and then press Setting front panel button (Enter on the remote control).

Using the TV 37