DVI-D and VGA Connectors

Connect a digital video cable for digital input signals from a PC monitor connector, or from a digital cable or satellite receiver set-top-box.

Connect an analog RBG-type cable for analog input signals from a PC monitor connector. See your component user documentation for information about the connector types it supports.

Power Switch

Turns the AC power on and off. This switch is on from the factory. When this main power switch is off, the TV is fully unpowered; the power/standby indicator light on the front of the TV is off, and neither the front panel power button nor the remote control can be used to turn on the TV. If you turn the main power switch off, wait at least 5 seconds before turning it on again.

RF IN and RS232C Connectors

Connect broadcasting (terrestrial) antenna or cable TV signal cable to the

RF IN connector.

This RS232 terminal is used for service only.

12Introduction