Using the HP MCPC with the TV remote control

1Turn on the TV and the HP MCPC.

2Press the appropriate TV input source button on the TV remote control to display the image on the main picture (refer to “Selecting the input source” on page 21):

•Choose the DVI/VGA button when you’ve connected the TV to the HP MCPC as a monitor using the DVI-D or VGA connectors.

•Choose the AV button when you’ve connected the TV to the HP MCPC as a TV using the Video or S-video inputs.

•Choose the YPbPr or YCbCr button when you’ve connected the TV to the HP MCPC as a TV using the Component Video inputs.

3Press HP.PC button on the remote control to select the HP MCPC as the controlled device.

Point the remote control at the HP MCPC remote control sensor and press the buttons you want to use. The remote control buttons, such as the guide, channel, volume, and cursor buttons, function along with the special HP MCPC buttons described in the table.

TV Remote Button

HP MCPC Button Function

 

 

YCbCr, YPbPr, AV, or DVI/VGA

Selects the TV input source for the main screen.

 

 

HP.PC

Selects the HP MCPC as the device controlled by the

 

remote control.

 

 

HP.MC

Start

 

 

Back (EXIT)

Back

 

 

Enter

OK

 

 

PIP Input

Record

 

 

Replay/Reverse

Replay

 

 

Skip/Forward

Skip

 

 

Installing or Replacing Remote Control Batteries

When the batteries are low, the red light on the remote control blinks twice when a button is pushed. Insert two AA non-rechargeable batteries into the remote control ensuring that you place them with the proper polarity.

1Press and open the cover on the back of the remote control.

2Insert the batteries into the remote control, and make sure that you match polarities.

3Close the cover.

18Setup