3Connect the red and white audio cables from your video source to the Audio In on the back of the TV. Be careful to keep the audio right and left channel connections correct for stereo sound.
4Turn on the TV and the
5Select
6To set up the TV remote control to operate the
Refer to your
Use YPbPr cables to connect your component video source or other equipment to the component input connectors (YPbPr or YCbCr) on the TV.
To make these connections:
1Turn off the TV and the component input source equipment.
2Connect one end of the red, green, and blue component cables to the YPbPr or YCbCr video output connector on the component video source, and connect the other ends to the YPbPr or YCbCr inputs on the back of the TV.
3Connect the red and white audio cables from your video source to the Audio In on the back of the TV. Be careful to keep the audio right and left channel connections correct for stereo sound.
4Turn on the TV and the component video source. Insert media into the component video source and play it.
5Select YPbPr1, YPbPr2, or YCbCr as the input source for the main TV picture (so you see the image playing from the component video source) by using the front panel buttons or press the YPbPr or YCbCr button on the TV remote control. Refer to “Selecting the input source” on page 21.
6To set up the TV remote control to operate the component video source, refer to “Programming the remote control for component control” on page 33.
Refer to your component video source owner’s manual for information about your equipment’s video output requirements.
Connecting the HP Media Center PCYou can connect the TV to an HP Media Center PC (HP MCPC) and use the special buttons on the remote control associated with the HP MCPC.
Refer to your HP MCPC documentation to connect the TV to the HP MCPC as:
•A monitor using either a VGA cable or a
•A TV using the TV input source connectors for video (composite) inputs,
17