Using the TV

Basic Operations

Turning on the TV

1Plug the power cord into an active AC power outlet. The Power/standby indicator light on the front panel flashes until the power is completely on; then the light is solid amber.

NOTE: The main power switch (on the back of the TV) is on from the factory. If the Power/standby indicator light is off after you plug in the TV, the main power switch is off. To operate the main power switch, reach around the left side of the front of panel, and press the button on.

If you turn the main power switch off, wait at least 5 seconds before turning it on again.

2Press the Power button on the front panel or on the remote control to turn on the TV. The Power/standby indicator light flashes until the power is completely on; then the light is solid blue.

Setting Up Your Channels

Use the Channel Auto Search feature to set up your channels. The Channel Auto Search scans channels 1 to 125 and adds the channels that return a signal. Use the following steps to run the Channel Auto Search:

1Press the MENU button on the remote control to bring up the OSD menu.

2Continue to press the MENU button until the last icon (Video Format) is highlighted.

3Use the Down arrow button to highlight the TV Channel Setup function, and then press the right arrow button to view the options.

4Select Air or CATV as your input source.

5Press the down arrow button once to highlight Channel Auto Search, and then press the right arrow button to begin the search. Channels 1 to 125 are scanned and the channels that return a signal are added to your channel list.

6Press the EXIT button on your remote control to return to your TV display.

Adding and Deleting Channels

Use the Channel Edit feature to add and remove channels that fit your preference. Use the following steps to add and remove channels:

1Press the MENU button on the remote control to bring up the OSD menu.

2Continue to press the MENU button until the last icon (Video Format) is highlighted.

3Use the Down arrow button to highlight the TV Channel Setup, and then press the right arrow button.

4Press the Down arrow button until Channel Edit is highlighted.

5Use the Left and Right arrow buttons to find a channel to add or erase, and then press the down arrow button.

20Using the TV