Connecting a PC

Connect a cable that matches the audio output terminal on the PC.

PC

Less than

Less than

4 in. (10 cm)

4 in. (10 cm)

PC

 

RGB

 

 

 

 

PC cable

Conversion

 

15-pin D-sub

adapter

 

Ferrite core (large size)

(if necessary)

 

 

 

 

Ferrite core (small size)

 

 

 

Less than

 

 

4 in. (10 cm)

 

Audio

Stereo plug

Connecting

Notes

PC signals that can be input have a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1200 lines.)

Do not set the horizontal and vertical scanning frequencies for PC signals that are above or below the specified frequency range listed in the table. The maximum resolution range:

 

Resolution

 

 

 

 

Model4:316:9

 

 

 

PL4200N

768 x 768

1024 x 768

 

 

 

PL5000N

1024 x 768

1366 x 768

 

 

 

If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity.

Some PC models cannot be connected to the set.

There is no need to use an adapter for PCs with DOS/V-compatible 15-pin D-sub terminal.

Additional equipment and cables shown are not supplied with this set.

Connecting 17