Operating Peripheral Equipment
Programming the remote control code
Your HP remote control is programmable. You can program the remote control to operate other home entertainment devices such as your VCR, DVD player, audio receiver, or
Programming the device code
The following steps describe how to program a device button if your brand is listed.
1Turn on the TV. Turn on the device you would like to program.
n
Read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before performing step 2.
n
If the device button did not blink twice, repeat steps 2 through 4, entering either the same code or the next code if provided.
5Aim the remote control at the device, and press the Power button once. The device should turn off. If it does not respond, repeat steps 2 through 4, trying each code for your brand until you find one that works. If it still does not work, try searching for the code; see “Searching for the device code” on page 69.
n
If the device does not have a Power button, press Play.
6Repeat steps 1 through 5 for each device you want to control with the remote control.
Operating Peripheral Equipment
2Hold down a device button on the remote control for 5 seconds until the device button blinks, and then release the device button. The device button blinks one more time and then remains lit.
3Locate the brand of your device and manufacturer codes (see the listing that follows).
4Enter the first
Searching for the device code
If your device does not respond to the remote control after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code.
1Turn on your home entertainment device.
2Hold down a device button on the remote control for 5 seconds until the device button blinks, and then release the device button. The device button blinks one more time and then remains lit.
3Enter 1, 1, 1, 1, and the device button blinks once and then remains lit.
Operating Peripheral Equipment 69