Display panel

Description

Spare part number

 

 

15.6-in, LED, BrightView SVA display panel

686603–001

 

 

Before removing the display panel, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

Remove the display panel:

1.Turn the computer right-side up, with the rear toward you.

2.Open the computer.

3.Remove the 2 screw covers (1) on the left and right side base of the display panel.

NOTE: Use a sharp probe to pop the covers out to avoid scratching the bezel

4.Remove the 2 Phillips PM 2.5x3 screws (2) on the left and right hinges that secure the display panel to the computer.

NOTE: Support the display panel as you are removing the screws.

5.Loosen the edges of the plastic bezel cover (3) from all four sides of the display panel.

6.Lift the display bezel cover (4), and then remove the cover (5).

Component replacement procedures 31