8.Remove the security bracket (see Security bracket on page 55
9.Remove the USB/Audio board (see USB/Audio board on page 56). Remove the power connector cable:
1.Turn the computer, with the right side toward you.
2.Disconnect the power connector cable (1) from the system board.
3.Remove the
4.Remove the power connector cable (3).
Reverse this procedure to install the power connector cable and bracket.
Speakers
Description | Spare part number |
|
|
Speaker Kit (includes left and right speakers and cable) | |
|
|
Before removing the speakers, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
58 Chapter 4 Removal and replacement procedures