4.Remove the heat sink (4).

Reverse this procedure to install the fan and the heat sink..

RJ-45 module cover

Description

Spare part number

 

 

RJ-45 module cover

686582-001

 

 

Before removing the RJ-45 module cover:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the display panel (see Display panel on page 31).

5.Remove the base enclosure (see Base enclosure on page 33).

6.Disconnect the battery cable (see Battery on page 35).

Remove the RJ-45 module cover:

1.Remove the 2 Phillips PM screws securing the RJ-45 module cover (1).

52 Chapter 4 Removal and replacement procedures