9.Release the support strip (1) that secures the display panel connector. Disconnect the display panel cable from the display panel (2), and then remove the panel (3).
Reverse this procedure to install the display panel.
Base enclosure
Description | Spare part number |
|
|
Base enclosure (Red) | |
|
|
Base enclosure (Black) | |
|
|
Before disassembling the computer, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the display panel (see Display panel on page 31).
Component replacement procedures 33