3.Click the Port Settings tab.

The Port Settings screen appears.

4.Click Advanced.

The Advanced Settings screen appears.

5.Select an available USB port number from the COM Port Number drop down menu.

6.Click OK to close the Advanced screen.

7.Click OK to close the Port Settings screen.

8.Verify that the Device Manager screen shows that the USB to serial converter is assigned to COM 1, and that the other USB device is assigned to a different port.

If the Device Manager screen does not automatically refresh to show the change:

a.Click Action.

The Action Menu appears.

b.Click Scan for hardware changes to refresh the screen and display the changes.

Maintenance 28

Page 28
Image 28
HP R1500 G3 UPS manual Maintenance