Video Quality ( only)—Sets resolution and compression for video clips. The setting remains in effect until it is changed, even when you turn off the camera.

Best (Default)—For outdoor action video clips or printing individual video frames up to 10.2 by 15.2 cm (4 by 6 in).

Better —For indoor video clips or printing individual video frames up to 7.6 by 12.7 cm (3 by 5 in).

Good —For capturing longer video clips or e-mailing shorter clips.

Shooting Mode ( only)—For selecting a shooting mode. For information about shooting modes and another way to select them, see Using the shooting modes” on page 17.

Flash Setting ( only)—For selecting a flash setting. For information about flash settings and another way to select them, see Setting the flash” on page 16.

Self-Timer—For capturing images or recording video after a 10-second delay (see

Using the Self-Timer settings” on page 21). The setting resets to Off after the image is taken.

Off (Default)—Disables Self-Timer.

On—For taking one delayed shot or video clip.

On-2 Shots ( only)—For taking two delayed shots.

Steady Photo ( only)—For minimizing blur in pictures. This setting remains in effect until it is changed, even when you turn off the camera.

Off (Default), On

Adaptive Lighting ( only)—Balances the relationship between light and dark areas. For more information, see Adaptive Lighting” on page 22.

Off (Default)

On

Image Quality ( only)—Sets resolution and compression for images. The greater the number, the higher the resolution. The setting remains in effect until it is changed, even when you turn off the camera.

8MP Best—For enlarging or printing images greater than 41 x 51 cm (16 x 20 in).

Normal (8MP) (Default)—For printing images up to 41 x 51 cm (16 x 20 in).

5MP—For printing images up to 28 x 36 cm (11 by 14 in).

2MP—For printing images up to 13 x 18 cm (5 by 7 in).

VGA—For sending images via e-mail or posting them to the Internet.

Burst ( only)—For taking two or more shots quickly in succession (see Using the Burst setting” on page 21).

Off (Default)

On

Tag—Applies a tag to pictures and video clips as they are taken or recorded. The setting remains in effect until it is changed, even when you turn off the camera.

To select a tag to apply, touch a tag, then touch OK.

For more information about tags, see Tagging images” on page 27.

Date & Time Imprint ( only)—Imprints date in lower left corner of image. The setting remains in effect until it is changed, even when you turn off the camera.

Off (Default)—No date or time imprinted on the image.

Date Only—Date permanently imprinted.

Date & Time—Date and time permanently imprinted.

Using the Picture Capture and Video Record menus

19