Manuals / Brands / Computer Equipment / Point of Sale Systems / HP / Computer Equipment / Point of Sale Systems

HP rp5800 Base Model Retail System, rp5800 Retail System Enable Stand Mode, Enable Trigger Mode

1 37

Download 37 pages, 837.07 Kb

Freestanding:

1.Peel the three rubber pads (9) off the backing sheet and affix them to the recesses in the bottom side of the Base Cover.

2.Place the stand on any flat surface and adjust as needed.

Scanning Modes

Enable Stand Mode

Enable Stand Mode programs the imager to operate in stand mode, where the scanner automatically senses and reads labels with no trigger pull required.

Enable Trigger Mode

Enable Trigger Mode programs the imager to operate in triggered mode, where the trigger needs to be pulled to initiate the reading of a label.

14 Chapter 4 Setting Up and Using the Scanner

ENWW

Contents

Page Page About This Guide Page Table of contents Page 1 Quick Setup Page Page Page Page 2 Product Features 3 Safety and Maintenance 4 Setting Up and Using the Scanner Configuring the Interface USB-COM Keyboard Interface Scancode Tables Country Mode Use Assembling the Stand Installation Enable Stand Mode Enable Trigger Mode 5 Programming the Scanner Aiming System Good Read Green Spot Duration 6 Operating Modes Page Page A Troubleshooting Page B Technical Specifications Page Page Page Page C Agency Regulatory Notices Modifications Cables Page Materials Disposal Disposal of Waste Equipment by Users in Private Household in the European Union HP Recycling Program Chemical Substances Restriction of Hazardous Substances (RoHS)