LED and Beeper Indications

The scanner’s beeper sounds and its LED illuminates to indicate various functions or errors on the scanner. An optional “Green Spot” also performs useful functions. The following tables list these indications. One exception to the behaviors listed in the tables is that the scanner’s functions are programmable, and so may or may not be turned on. For example, certain indications such as the power-up beep can be disabled using programming bar code labels.

Indicator

Description

LED

Beeper

 

 

 

 

Power-up Beep

The scanner is in the

 

Scanner beeps four times at

 

process of powering-up.

 

highest frequency and

 

 

 

volume upon power-up.

 

 

 

 

Good Read Beep

A label has been

LED behavior for this

The scanner will beep once

 

successfully scanned by the

indication is configurable via

at current frequency, volume,

 

scanner.

the feature “Good Read:

mono/bitonal setting and

 

 

When to Indicate” (see the

duration upon a successful

 

 

PRG for information).

label scan.

 

 

 

 

ROM Failure

There is an error in the

Flashes

Scanner sounds one error

 

scanner's software/

 

beep at highest volume.

 

programming.

 

 

 

 

 

 

Limited Scanning Label

Indicates that a host

N/A

Scanner 'chirps' six times at

Read

connection is not

 

the highest frequency and

 

established.

 

current volume.

 

 

 

 

Scanner Active Mode

The scanner is active and

The LED is lit steadily1

N/A

 

ready to scan.

 

 

 

 

 

 

Scanner Disabled

The scanner has been

The LED blinks continuously

N/A

 

disabled by the host.

 

 

 

 

 

 

Green Spot1 flashes

Upon successful read of a

N/A

N/A

momentarily

label, the software shall turn

 

 

 

the green spot on for the

 

 

 

time specified by the

 

 

 

configured value.

 

 

 

 

 

 

Image Capture

When ready to capture

Blue light flashes 2 times

N/A

 

image

when updating

 

1Except when in sleep mode or when a Good Read LED Duration other than 00 is selected

Programming Mode - The following indications ONLY occur when the scanner is in Programming Mode.

INDICATION

DESCRIPTION

LED

BEEPER

 

 

 

 

Label Programming Mode

A valid programming label

LED blinks continuously

Scanner sounds four low

Entry

has been scanned.

 

frequency beeps.

 

 

 

 

Label Programming Mode

A label has been rejected.

N/A

Scanner sounds three times

Rejection of Label

 

 

at lowest frequency and

 

 

 

current volume.

 

 

 

 

ENWW

LED and Beeper Indications 25