7.Enter the number of sheets:
●Single sheet
●
8.Press the Proceed (►) key.
The control panel displays a confirmation message.
9.Press the Proceed (►) key. The Front Page screen appears.
10.Press the Go Online key.
11.Send a print job from the RIP.
For multiple copy jobs ejected to the output side of the printer, the printer control panel will prompt for the next sheet a short time before the previous sheet is done printing. Load the subsequent sheet against the media alignment bar, and press the Sheet Ready foot pedal or control panel button. The printer prints on the next sheet and will use the same option settings on all of the copies in the print job.
Quick Load
If printing completes and the Front Page screen is displayed, you can still reload a sheet of the same media type and dimensions without reconfiguring the media. Use Quick Load or Load:
1.Press the Load key on the Front Page screen.
The control panel displays a menu with a Quick Load and Load option.
●To load a sheet of media with the same media type with the same dimensions as the previous job, press the Quick Load key.
●To load a sheet of media with the same media type with the same dimensions as the previous job, but different flatness, thickness, or number of
2.Place the media onto the media drive belt, and push it flush against the media alignment bar, then left along the media alignment bar until it touches the media fence.
At this point, the control panel allows you to adjust the vacuum fans and head height off the media.
3.Press the Sheet Ready foot pedal or Sheet Ready button on the control panel.
The printer is ready to receive the next job from the RIP.
To load a new type of media, or a sheet with different dimensions, number of
Multi-sheet N-UP
22 Chapter 2 Printing | ENWW |