6.For each printhead, use a single finger on a clean area of the saturated lint-free cloth to wipe the printhead orifice from the input-side to the output-side of the carriage.

To avoid pushing debris into the printhead orifice, make sure each wipe is done with a clean area of the cloth. The cloth should be fully saturated with head flush.

7.From the control panel, select PURGE.

8.When the purge completes, selecting PRIME BARS from the control panel.

9.Examine the prime bars for missing jets. If a printhead has missing jet, repeat steps 6 through 8.

72 Chapter 5 User cleaning

ENWW