Manually clean the printheads (bi-weekly)

1.Move the output-side table away from the printer.

2.From the control panel, select the following:

Tools > Maintenance > Manually Clean Printheads

This will cause the rail and output roller to raise to their highest positions and move the carriage out over the belt.

3.Open the output-side door to access the carriage.

CAUTION: Wear protective gloves, such as latex, to protect your hands from being stained with ink.

CAUTION: Wear safety glasses to protect your eyes from ink and head flush that may splash into your eyes.

4.Place a piece of scrap vinyl under the carriage (see A in the photo below). You can use any media that will protect the belt from dripping ink and/or head flush.

5.Fully saturate a lint-free cloth with head flush solution.

ENWW

Manually clean the printheads (bi-weekly) 71