Table A-1Specifications (continued)

Optional auxiliary

Supplied 24 volt DC power supply with universal adapters, connected from the auxiliary power jack

power for vacuum

on the vacuum/pressure assembly to one of the following:

system

● Wall outlet — 100-240 VAC, 50/60 Hz, provides temporary power to the vacuum system when it

 

 

is necessary to remove power from the printer for service.

 

● UPS — customer-supplied uninterruptable power supply, output 100-240 VAC, 50/60 Hz,

 

minimum of 15 watts of power, provides battery backup to the vacuum system in the event of a

 

power failure. UPS is connected to the electric wall outlet.

 

 

Energy consumed per

● Sleep/idle (lamps off): 0.74 kWh

hour of operation

● Printing 6x6, Production Mode, low lamps: 3.31 kWh

 

 

● Printing 6x3 Billboard Mode, high lamps: 4.67 kWh

 

 

Printing technology

12 piezo-electric inkjet printheads, variable drop size, 192 nozzles per printhead

 

 

Resolutions

1200 x 600 dpi, 600 x 600 dpi, 600x300 dpi (as supported by the RIP)

 

 

Ink

HP Scitex FB250 Ink, 6-color (CMYKlclm) flexible UV cure inks, off-head ink system.

 

 

Curing system

Dual carriage-mounted 550-watt shuttered UV lamps.

 

 

Vacuum/pressure

Nominal relative vacuum: 9.3 mm Hg (5.0 in H2O)

system

Maintains negative relative pressure at the printheads and provides air pressure for purging. Since

 

 

relative pressure is maintained, the printer can be operated at various altitudes above or below sea

 

level without adjustments to the system.

 

 

Media handling

Vacuum belt media drive for easy loading and accurate media feeding.

 

Front and rear roller tables support rigid materials up to 250 cm (98.4) in wide and 203 cm (80 in) long,

 

56.7 kg (125 lb) in weight.

 

A second set of roller tables (optional) extends the support of rigid materials up to 381 cm (150 in)

 

long.

 

Optional Supply & Take-up system supports up to 2.5 m (98.5 in) wide roll-fed media on 7.6 cm (3.0

 

in) cores, with a maximum diameter of 19 cm (7.5 in).

 

 

Maximum media

64 mm (2.5 in)

thickness

 

 

 

Maximum print width

250 cm (98.4 inches)

 

Edge-to-edge printing capable in the width and length of rigid media.

 

 

Maximum print length

1016 cm (400 inches)

(rigid media)

 

 

 

Minimum printable

Width: 15 cm (6 in)

rigid sheet size

Length: 23 cm (9 in)

 

 

 

Software features

Touch screen with graphical interface.

 

Automatic calibration and detection/substitution of missing jets.

 

Media Wizard stores operational parameter sets by media type for subsequent recall. Automatic edge

 

detection and media positioning.

 

Automatic head clearance above media.

 

Stored Jobs feature stores print jobs on the printer for reprinting.

 

 

ENWW

Specifications 93