3.Remove the battery (4).
Reverse this procedure to install the battery.
3G antenna board
NOTE: This section applies only to HP Stream 8 Tablet 59xx models.
Description | Spare part number |
|
|
3G antenna board |
|
|
|
Before removing the 3G antenna board, follow these steps:
1.Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the tablet.
3.Disconnect the power from the tablet by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the tablet.
4.Remove the back cover (see Back cover on page 18).
5.Remove the middle frame (see Middle frame on page 20).
6.Disconnect the battery cable from the system board (see Battery on page 21).
Remove the 3G antenna board:
22 Chapter 5 Removal and replacement procedures
