Reverse this procedure to install the display panel cable.
Speakers
Description | Spare part number |
|
|
Speakers (include left and right speakers and cables) | |
|
|
Before removing the speakers, follow these steps:
1.Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the tablet.
3.Disconnect the power from the tablet by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the tablet.
4.Remove the back cover (see Back cover on page 18).
5.Remove the middle frame (see Middle frame on page 20).
6.Disconnect the battery cable from the system board (see Battery on page 21).
Remove the speakers:
1.Unsolder the red and black speaker cables (1) from the system board speaker contact points.
NOTE: When installing the speakers, the red speaker cables are soldered to the system board “positive” speaker terminals. The black speaker cables are soldered to the system board “negative” speaker terminals.
Speakers 29
