Configuring an Array

Running CPQONLIN

1.Enter cpqonlin at the console prompt.

2.Use the arrow keys to highlight Array Configuration Utility, and then press the Enter key.

3.From the list of controllers that is presented, select the one that you want to configure.

—If no logical drives are configured for the controller, the auto-configuration wizard screen (Figure 5-2) is displayed.

—If logical drives are present on the controller, the manual configuration screen (Figure 5-3)is displayed.

Press the F1 key for online help at any time on either screen.

Automatic Configuration

Figure 5-2: CPQONLIN auto-configuration wizard screen

1.If the proposed logical configuration shown on the wizard screen is acceptable, highlight the fault-tolerance level that you want for the logical drive and press the Enter key. Otherwise, select Custom Configuration and continue the procedure as described in the “Manual Configuration” section.

2.Press the Esc key to save the changes and return to the controller selection screen.

3.Restart the system to apply the changes.

HP Smart Array 641/642 Controller User Guide

5-5