Configuring an Array

NOTE: Raw logical drives are invisible to the operating system. To make the new logical drives available for data storage, format the logical drive using the instructions given in the operating system documentation.

Manual ConfigurationFigure 5-3: Main manual configuration screen

Highlight the controller, array, or logical drive that you want to configure, and then press the Enter key. The menu options for that item are shown in the panel on the right-hand side of the screen. Table 5-2lists the menu options for each item in the Logical Configuration View panel. If an option is not applicable in any particular case, it is not displayed in the panel.

5-6

HP Smart Array 641/642 Controller User Guide