Layer <Image> <Overlay>

Specify the layer of the default visual.

Transparent

Specify that a visual with an application-accessible transparent entry in the default colormap be used.

Specifications in the "DefaultVisual" section, except for "Depth", are ignored on VRX devices. See the "ScreenOptions" section below for VRX-related options.

MonitorSize <diagonal_length> Inches MM

Specify the diagonal size of the monitor. After the "MonitorSize" keyword, you must specify the diagonal length of the monitor and then the units. Use this entry only if you are using a nonstandard monitor.

MinimumMonitorPowerSaveLevel <value>

Specify the minimum power save level to be used by the monitor during screen blanking. You must specify a level of 0-3. If the option is not used, the default is level 0. On devices that do not support DPMS, this option will be ignored.

ScreenOptions

Screen options are device-dependent options that are documented in a file in the X server information directory (for example, /usr/lib/X11/Xserver/info/screens/hp).

Sample X*screens Files

Below are several sample X*screens files that illustrate the new format.

•This is the minimum legal X*screens file, the "Screen" keyword followed by the screen device. Since no other information is given, the X server will assume default values for other options and settings.

Screen /dev/crt

Figure 1: Results of Minimal Legal X*screens File

Page 25

Graphics Administration Guide for HP-UX 10.20