Screen /dev/crt
DefaultVisual
Transparent
The display diagram would be the same as that of the "Results of Minimal Legal X*screens File" configuration, above.
•This sample X*screens file could be used on a system with a
Screen /dev/crt ScreenOptions
EnableOverlayTransparency
The display diagram would be the same as that of the "Results of Minimal Legal X*screens File" configuration, above.
•These sample X*screens file entries could be used on a system with two homogeneous graphics devices. Assuming the first device is associated with the device file "/dev/crt0" and the second device is associated with the device file "/dev/crt1", both examples specify a horizontal Single Logical Screen configuration.
SingleLogicalScreen 1 2 /dev/crt0 /dev/crt1
or
SingleLogicalScreen 1 2 /dev/crt0 /dev/crt1
Figure 3: Two Physical Displays, Single Logical Screen (1X2)
•These sample X*screens entries could be used on a system with four homogeneous graphics devices. Assuming the first device is associated with the device file "/dev/crt0", the second device is associated with the device file "/dev/crt1", etc. The following examples specify valid Single Logical Screen configurations.
Page 27 | Graphics Administration Guide for |