HP UX Encrypted Volume and Filesystem (EVFS) Test Configuration Requirements

For more information on using HP OpenView Storage Data Protector to recover the backed up keys of an HP-UX EVFS volume, see Test Scenario 3B.

Testing Back Up and Recovery of Data on an HP-UX EVFS Volume Using HP OpenView Storage Data Protector

HP successfully tested the following scenarios to validate the effective backup and recovery of data on HP-UX EVFS volumes by using HP OpenView Storage Data Protector:

•Test Scenario 1

To verify the full volume backup of encrypted data from an HP-UX EVFS volume to a tape device, and the recovery of data from the backup tape device to an HP-UX EVFS volume by using HP OpenView Storage Data Protector.

Note:

If the volume size is greater than the tape size, the data spans across multiple tapes. For more information, see Test Scenario 1A.

•Test Scenario 2

To verify the file level incremental backup and recovery of data from an HP-UX EVFS volume to a disk partition that is also an encrypted volume, by using HP OpenView Storage Data Protector.

•Test Scenario 3

To verify the backup and recovery of keys of an HP-UX EVFS volume, by using HP OpenView Storage Data Protector.

Test Configuration Requirements

This section discusses the test configuration requirements to replicate the scenarios to validate the effective backup and recovery of data on HP-UX EVFS volumes.

Table 7 lists the software requirements to replicate the tests for Scenario 1 and Scenario 2.

Table 7 Test Software Configuration

Product	Configuration Used
Data Protector	HP OpenView Storage Data Protector
	A.06.00
	Data Protector Cell Manager Version: 6.0
EVFS	HP-UX Encrypted Volume and File System (EVFS)
	A.01.00.01

Table 8 lists the system requirements to replicate the tests for Scenario 1 and Scenario 2

Table 8 System Requirements

Product System Requirement

10