5.Start the restore session. The Data Protector displays a Session Information message that notifies the successful completion of a restore session, as shown in the following figure.

Step 4 To close raw access to the HP-UX EVFS volume, enter the following command:

$ evfsvol close /dev/evfs/vg01/ldp_raw

The following output is displayed:

Successfully closed raw access to EVFS volume "/dev/evfs/vg01/ldp_raw"

Step 5 To enable the encrypted volume and mount back the file system on /dp_verify, enter the following commands:

evfs6# evfsvol close /dev/evfs/vg01/ldp_raw

29