4.In the Destination property page, specify the target location where the backed up keys must be restored, as shown in the following figure. You can restore the backed up keys to the original location, a different location on the same client system, or a different client system. In this test scenario, evfs6.hp.com was selected as the target client system, where the backed up keys were restored.
5. Click Restore to initiate the restore session.
The Session Information message displays the status of the recovery and notifies the successful recovery of data. You can also specify the warning and error message that must be displayed during the restore session.
Verifying the Backup and Recovery of the Keys of an
To verify if the backup and restore operations in Test Scenario 3A and Test Scenario 3B are successful, complete the following steps:
56