Troubleshooting

Installation Issues

If a system cannot access the software source depot, either swagentd is not running on the target system or the swlist command cannot see the source depot.

Correct /etc/{hosts, nsswitch.conf} and continue from here

Continue? [Y/N] :

Suggested solutions: check that swagentd is running. Check whether there is an entry for the target system in /etc/hosts. If there is no entry, then ensure the hosts file is not the primary lookup for the “hosts” entry in the /etc/nsswitch.conf file.

Appendix A

49

Page 49
Image 49
HP UX Serviceguard Storage Management Software manual Installation Issues